|You will want to use a photo texture cream or gel medium from the art
department at most craft stores.
|Step 1: Use the Gel Medium to coat the surface - be sure
to create a design like swirls or chevron or brush strokes. Let
dry completely before proceeding.
|Step 2: Spray Paint the color you want to show up when you sand
and makes your texture pop. Let dry.
|Step 3: Spray paint the color you want your "words" to be on your
sign, mine are white so I added a layer of white spray paint. Let dry.
|Step 4: Add your vinyl cut out, make sure you apply it well and seal
the edges as much as possible. Then spray pain the color you
want around your words (mine is red) and let dry.
|Step 5: Peal off the vinyl.
|Step 6: Sand the surface - be sure to go all different directions to
make the texture pop. Clean off with a cloth and spray light coat
of clear varnish.
|This is by my friend Staci Potter!!
Wood, 2x4s and More! Board: